When the battery is charged, discharging cycle and test dual-storage battery, it is necessary to discharge according to a certain specification to verify whether the battery reaches the rated capacity. The current discharged from the battery rated capacity 1/20 to each single battery voltage is 1.75V, and measure the primary voltage every 2h after start discharge, the voltage dropped to 1.8V, due to the low voltage, 15 ~ 20mim measured primary voltage When the voltage drops to 1.75V, the discharge should be stopped immediately, otherwise the voltage will fall sharply to 0 to cause a bad pole plate, and cause the next charging difficult. There are many discharge methods (such as using lamps, discharge, discharge with variable resistance, discharge with electrolyte and low-voltage battery), can be selected depending on specific conditions. In the discharged line, the current table must be connected in series, and the voltmeter is connected in line to observe the voltage value in time, and the discharge is stopped.Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
