1. Application of lead-acid battery UPS:Lead-acid batteries can be done cheaper and capacity can be done, almost completely sealing maintenance lead-acid batteries in the UPS configuration. The UPS is divided into lamination (5-15 minutes), and the long-delay timing system (0.5-24 hours) in a manner as the battery configuration time is long. The battery of the UPS lamina configuration is delayed in 5-15 minutes, and the discharge current rate is large (3C-4C), which requires the battery that the UPS labeled machine configuration is very emphasized to have a strong high-magnification large current discharge performance. This requires that the battery positive plate must be a high-current discharge performance, such as PB-Al-Sb), only the battery of this plate can ensure a longer use in the configuration of its UPS comparator. life. The battery use conditions for long delay UPS are relatively superior, belonging to the low-magnitude of small current discharge, general service life, and the capacity of more than 65% of the floating charge is generally no problem. Therefore, the long-delayed UPS is relatively high.
2. Application of lead-acid battery EPS:
The EPS emergency power supply generally has a battery-enabled function. The discharge voltage is not cut off, and the ordinary lead-up battery is easy to charge after power consumption. This requires the battery of the EPS that must have a strong depth discharge performance. The low-haimbin lead-acid battery is exactly the price of the EPS battery, which is suitable for the EPS power configuration. A general pure lead-calcium-type battery, the life expectancy is not long in EPS, and it will be scrapped in a few times in the temperate mode. Although the nickel-type battery or nickel hydride battery has strong depth discharge performance, the price is too high.
3, lead-acid battery instrumentation apparatus:
Instrumentation, the battery is generally small, in addition to emphasizing battery capacity, life, very emphasizing the self-discharge performance of the battery and the full sealing indicator of the non-leakage liquid. Because the instrumentation is not used in most of the time, its built-in battery is in an empty state, and the self-discharging battery is running in the long-term empty, and it is not good to be used. Such use.
4, lead-acid battery civil inverter application:
The civilian battery emphasizes the cost of cost-effective, and the general open-rich lead-acid battery (ie, automotive battery) can affect the body's physical and mental health during the charging process. Therefore, such a battery is not encouraged in the room, it should be applied with a full-sealing-free maintenance, unless the opening of the rich liquid-free battery can also be opened in a ventilated ventilation in the air flow, and the balcony.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
