The colloidal battery belongs to one of the lead-acid batteries, which can be used for sightseeing vehicles, electric vehicles, clean energy sweeping vehicles, washing machines, small diamonds, pallets, etc. When the electrolyte is a colloidal state, when charging, you need to choose a suitable charger to avoid excessive charging and aspects, and the small compilers simply analyze several charging methods:1. Pulse charging, both simple and economical methods, and the low-voltage AC rectification of the transformer secondary output is charged to the battery. This method is relatively large, the charging speed is fast, the disadvantage is that the charging current fluctuates when the grid voltage fluctuates. Due to large charging current, the battery temperature increases, the electrolyte loss is large, resulting in damage to the battery damage, which is rare to maintain the sealed lead-acid battery.
2, charging with constant current, preventing too much temperature rise in the battery and the loss of electrolyte, the charging current is adjusted, the time is longer, the other, the charging time is too long, will overture, prevent Damage to the battery due to overcharges, you need to have an overcharge or timing circuit.
3, constant voltage charging, theory and practice have proven that when the charging voltage is lower than the charging voltage limit (for 12V battery, this value is) is safe, even if the charging time is very long, there is no danger, The battery can also work in a floating charge.
Colloidal battery charging method and precautions
Colloidal battery charging precautions, don't wait until the colloidal battery is complete, and it should be charged in time after discharge.
The battery's charger is as good as a charger, which is conducive to improving the life of the colloidal battery.
The battery should be fully charged, and the storage should be cool and dry, do not close to the heat source, do not direct direct sunlight. Before the use of more than one month, it should be replenished, and the depth should be made in three months.
When the sky is hot, you should pay attention to the battery temperature. Don't fill the battery. If your hand is too hot, you can stop again. Winter temperature is low, the battery is easy to charge, and the charging time (such as 10%) can be appropriately extended.
If it is a battery, it should be replaced in time when it finds only problems, and can extend the life of the whole group. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
