Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Email:sales@geerady.com



8 pay attention to the battery

8 pay attention to the battery(1) Be careful not to continuously use the starter, each startup should not exceed 5 s, twice should be 10s-D15S, so as not to cause a large amount of discharge caused damage to damage.

(2) Note that the insufficient power should be supplemented in time; according to the seasonal change, the density of the electrolytic solution is adjusted to the maintenance station; the electrolytic solution used should be purified, and the electrolytic solution should be highly purity of sulfuric acid and distilled water.

(3) Pay attention to the state of the outer casing, discovering the cracking of the sealing, the shell is broken, the pole column is severely worn or broken, and should be repaired in time.

(4) Pay attention to low temperature, special insulation, antifreeze measures should be taken, and the engine preheating is taken in advance, avoiding the cooler to start, resulting in a large amount of battery.

(5) Wipe the electrolyte and dirt from the cleaning of the housing and the electrode column collet with warm water, then apply a three-layer Vaseline oil film to avoid corrosion columns and wire chucks to keep the outer casing dry clean.

(6) Check the height of the electrolyte liquid, should keep the liquid level between the Max-DMN mark, the liquid surface is too low to add distilled water, and then immediately after filling the distilled water, it should be immediately operated for a few minutes, so that the electrolyte Mix is ​​uniform to prevent newly adding distilled water icing; prevent impurities such as iron filings in the battery when adding distilled water.

(7) Note that the mixing hole screw is tightened, and the vent hole on the screw remains smooth, otherwise the gas generated during operation will damage the outer casing during operation.

(8) Pay attention to the loading of the battery, negative electrode, and the polarity of the battery cannot be made wrong, so as not to damage the generator. When removed, remove the iron line and then remove the fire; first fix the fire, the back is loaded and the electric line is removed.  Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery