What should I pay attention to when using electric forklift batteries?

  The electric forklift battery is also known as the battery, there are two types of traction type and start-type, and the internal combustion is used to start the electric forklift battery, and the electric forklift uses a traction type electric forklift battery. The electric forklift battery has an acidic and alkaline, a general internal combustion vehicle adopts a lead-acid-type electric forklift battery, a monobic battery nominal voltage of 2 volts, and is 12 volts.     The electric forklift battery electrolyte ratio is 1.28 at the standard temperature of 15 degrees Celsius, and when the electric ferrobe battery is less than 1.5 volts, or when the electrolyte is reduced to 1.17, it indicates that the electric forkle battery discharge is finally charged, and it must be charged in time. The electric forklift battery electrolyte liquid surface must be higher than 10 to 15 mm high, and the liquid surface must be supplemented with distilled water in time, and other liquids should not be added.     The electric forklift battery in use is generally charged once a quarter, and the charging current is from 10, the charging time is about 10 hours. Long-term electric forklift batteries should be fully placed in a cool dry place, and charge once every other month. Electric forklift batteries should pay attention to the following: 1. The battery can produce flammable gas, which may cause explosions, which is strictly forbidden to smoke near the battery, which is strictly prohibited to produce any flame or spark. The battery must be in a good ventilation in the storage or charging, but do not at the ventilation, avoid the corrosion of the acid fog.   2. Corrosive liquids in the battery solution may cause serious burns, and must avoid contact with skin, eyes or clothes. If you accidentally occur, please rinse with a lot of water, and you will take your medical treatment.   3. When checking or maintaining the battery, use rubber gloves to avoid electric shock.   4. The battery surface or connection must remain clean. Dust, impurities, etc. must be cleaned with wet cloth, otherwise it will leak electric, and even cause fire.   5. When cleaning the battery, be sure to use a wet cloth, do not use the dry cloth.   6. Do not connect between the positive electrode and the negative electrode of the battery.   7. When charging, the electrolyte temperature should not exceed 50 degrees Celsius, so as to avoid damage to the electrolyte overflow, and the summer is especially paying attention to.   8. Before pulling the battery, in order to avoid spark, be sure to turn off the lock of the plate and the switch of the charger.   9. Do not lower than the minimum, otherwise the battery is easy to burn off.   10. Do not close in children. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery LiFePO4 Battery 48V 150AH LiFePO4 Battery 48V 100AH