1. First check the display of the charger and the recording of the charger before the discharge stroke battery and the charger. If there is an error message on the charger panel, the charging of the general battery is not completed. When the charger fails, the charging process is interrupted. When the state of charge is normal, the average voltage of the unit, the output capacity, and the end of the charging end, and then the connection of the battery and the charger is disconnected.2. Clear dust on the surface of the forklift battery to avoid the formation of the discharge circuit on the surface of the battery, shorten the battery discharge time. But please pay attention not to rinse with water, just wipe it with a clean cloth.
3. Check the connection of the forklift battery pack to the battery power output line to ensure that the battery is connected well, ensuring that the current output is stable.
4. Before connecting the battery plug to the forklift battery power outlet, check whether the level of each battery electrolyte is within the standard range. If the liquid level of the electrolytic solution is low, distilled water should be added to the standard range (generally required the liquid surface of the electrolyte to cover 10-15 mm. Conditional can use the automatic water heating system of the battery to ensure that the water is properly added The liquid surface). Conditionally use the battery's automatic water heating system to ensure that the level of water is properly added. The battery is connected to the power outlet of the forklift battery after the fusion. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
