The technical parameters of the electric truck indicate the structural characteristics and working performance of the forklift, mainly including the rated weight, load center distance, maximum lifting height, door frame inclination, maximum lifting speed, maximum driving speed, minimum turn radius, minimum ground clearance The wheelbase and the width and the right-angle minimum stacking channel width, and then talk about the basic parameters of the forklift battery.1. Rated weight
The rated lifting weight of the forklift refers to the maximum weight of the lifted cargo to T (ton) when the center of gravity of the center of gravity is not large to the front wall of the fork. When the center of cargo on the fork exceeds the prescribed load center distance, the weight should be reduced accordingly due to the limitations of the longitudinal stability of the forklift. Diesel forklift can reach 16T. The electric forklift is mostly below 5t.
2. Load center distance
The load center distance refers to the horizontal distance from the front wall of the fork vertical segment when placing a standard cargo on the fork, expressed in mm (mm). For the LT forklift, the specified load center distance is 5∞mm.
3. Maximum lifting height
The maximum lifting height refers to the vertical distance of the frozen segment on the surface of the forklift in the flat solid ground.
4. Door tilt angle
The gantry tilt angle refers to the larger inclination of the front or back of the door frame to the front or back of the door frame. The role of pre-inclination is enough to facilitate the operation of the fork and unload the cargo, the prevention of goods slipped from the fork while the car is running. According to the job needs, the typical tilt angle in front of the truck is 3-6. After the angle of IO. -12. .
5. Maximum lifting speed
The maximum speed of the forklift is usually fixed when the forklift is fully loaded, and the maximum speed of the goods is expressed in hin. Increase the maximum lifting speed, improve work efficiency, but the lifting speed is limited, and the loss of goods and the loss of the loss. At present, the largest lifting speed of domestic forklifts has increased to 20RN / min.
6. Maximum driving speed
Improve driving speed has a great impact on improving the efficiency of the forklift. The internal combustion truck is performed on the weight of IT, and the maximum travel speed is up to i 8km / h.
Sign in. Minimum turning radius
When the Chongqing forklift travels at a low speed, when the direction is filled, the outermost side of the vehicle body and the most innermost to the turning center are called the minimum outer turn radius and the minimum inner turn radius. The smaller the radius of the minimum foreign commither, the smaller the area required when the forklift turns, the better the motor. For N forklift, the turning radius is about 1.2m.
8. Minimum ground clearance
The minimum separation of the ground is to refer to the distance from the lowest point to the ground on the vehicle body, which indicates that the forklift has no collision of the abutment of the obstacle. The larger the clearance of the minimum separation, the higher the passage of the forklift.
9. Forklift battery model
Forklift battery has iron box, output line, plugper, float cover, battery monomer (2V), etc., has 24V, 48V, 80V is most common, and 36V, 72V, national standard, BS, DIN standard Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
