At present, most of the vehicle battery is a dry-tree battery. It has the advantage that the car can be activated after 30 to 40 minutes after adding electrolytes. Some owners do not understand the working principle of dry-hooked batteries, which will not maintain, so that the battery life is reduced. Correctly select and use the battery to start from ten aspects.When you buy a battery, you see the above letters, where there is a QA letter as a dry-treated battery.
1. First shake the electrolyte and then add it to the battery. Please wear gloves when you operate. Be careful not to spline the electrolyte on your hand or clothes.
2. The battery without a marker line, the electrolyte high is 10 to 15 mm; there are two red lines, the electrolyte must not exceed the red line.
3. Some people think that the more electricity of the electrolyte, this is a wrong idea. When the car runs at high speed, the generator output voltage is greater than the battery voltage and start charging the battery. When charging, the electrolytic fluid is expanded, and if the electrolyte is too full, it will overflow from the small hole in the battery cover. The electrolyte is electrically conductive. Once there is a positive and negative two poles, the loop self-discharge is formed. Cars cannot be started and shortened battery life. In this case, apply cotton wire to wipe the electrolyte, or rinse with boiling water.
4. Do not let other items into the battery when adding electrolyte. If there is anything inadvertently fell, don't remove the metal material, apply a wooden stick to clamp the impurities;
5. Regularly check whether the small holes on the battery cover are ventilated. If the small holes are blocked, the generated gas does not roll out, and the electrolyte will be brought to the battery housing when the electrolyte is expanded, thereby reducing the life of the battery.
6. Regularly check the liquid level height of the electrolyte, and add an electrolytic solution in time when the liquid level is low.
7. If the vehicle is placed for a long time, the car will be launched every 25 days, and the medium speed is run for about 20 minutes. Otherwise, the car is placed too long and it will be difficult to start.
8. When the battery is removed from the car, the negative re-removal is first removed, and it is contrary to this. When charging, the battery cover must be screwed and cannot be used to approach the battery port that is being charged. Because the hydrogen produced in the battery during charging is easy to break.
9. Do not replace a battery that is larger than the original battery capacity. Because the power generation of the automotive generator is fixed. If the battery is changed, the new battery can be filled with the new battery, and the car cannot start smoothly, and the battery's long-term loss will shorten the life.
10. When the car is started, the startup time should not exceed 3 to 5 seconds, and the startup time is not less than 15 seconds.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
