During the charge and discharge process, the water in the electrolyte gradually decreases due to electrolysis and evaporation, resulting in a decrease in electrolyte liquid. If it is not supplemented in time, it is possible to shorten the service life of the battery, and the distilled water should be supplemented in time. Do not use drinks with pure water instead, because in pure water contains a variety of trace elements, the battery will cause adverse effects.When adding an electrolyte or water to the battery, it should be noted that the electrolyte high over the polar plate 10 to 15 mm; there are two red lines, the electric ferrite must not exceed the red line. The electrolyte is too full to overflow from the small hole in the battery cover. Once flowing to the battery positive and negative two poles, the loop self-discharge is formed. In this case, the electrolyte should be wipe off, or rinse with boiling water.
If there is anything inadvertent, if there is anything inadvertage, you can't go to [3], apply a wooden stick to remove the impurities; if the wire or copper wire is removed, the metal molecule enters the battery under the corrosion of sulfuric acid. Form a self-discharge to damage the battery.
If the vehicle stops running for more than 20 days, the negative electrode wire of the battery should be removed to avoid leakage accidents.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
