1. Remove the batteryFirst take the battery along with the battery box, place it on the workbench, remove the lock screw, etc. Carefully open the battery case, use 50W iron iron to heat the battery terminals from the battery terminal, and immediately use the insulating tape to prevent short-circuit accidents; when the wires between the welding battery can be welded One head, holding the joint, reintegrating the other joint, and then put the connection immediately in the specified place to prevent the battery from shorting the battery.
Some batteries use adhesives such as adhesives when installed (generally adopting non-adhesive), and requires force to take out the battery to take out (but not too hard). If there is difficult operation, the battery can be slightly heated, or the adhesive is dissolved, and the battery is removed. Finally, the residual gasket or adhesive should be removed, ready to install a new battery.
2, check
Check all the quality of the connection, while checking the safe, charging socket, and whether the battery leader contact is normal and securely, and all connectors are fastened. Replacement should be replaced, and the reliability should be reviewed, and unreliable will be replaced (including battery cases, etc.).
3, installation
Installation according to the requirements in the new battery packing box.
4, trial
After several charging and discharge, the use is normal, it can be carried out normally. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
