The battery is the nerve center of the electric vehicle circuit, and its performance is good or bad directly affects the normal operation of the vehicle. However, because some owners and maintenance personnel do not understand or do not pay attention to the use and maintenance of the battery, thereby causing early damage to the battery, and even damage other electrical equipment.Nowadays, some misunderstandings encountered in daily work:
One: Ignore the venting hole of the battery
The ventilation hole on the new battery cover is generally sealed. The bond paper must be taken when used, otherwise the air hole cannot be excluded when the gas is chemically reaction, which will cause an explosion due to high pressure.
Two: Battery charge capacity is not matched with the engine
The current starting the engine is generally 150-200A, or even to 300A at low temperatures. When the charge capacity does not match the engine, the battery charge is hit, the resistance is increased, and the battery will discharge dramally, speed up the reaction of the active substance and sulfuric acid in unit time, so that the battery temperature is super high, and the polar plate causes the load to bend It causes the active substance to fall off, and the pole is damaged, making the battery life. If a small car is used for a large capacity battery, the active material cannot be fully utilized, causing economic decline. The battery is based on the power, voltage and load of the power, the power of the power, the load of the electric device, so it is necessary to pay attention to the charge capacity when interchanged.
Third: Electric vehicle battery is too random
Usually after the battery is applied, the car is required to operate for a while, charging the battery through the generator, so that the distilled water is sufficiently mixed, and the performance of the battery is not affected. Conversely, if the distilled water does not operate, the distilled water does not mix the electrolytic solution, which causes the battery's self-discharge or damage the polarity of the battery.
Four: New battery does not perform initial charging
The first charging of the battery is called the initial charging, and the initial charging has a great impact on the service life of the battery. If not charging, add water directly, the battery capacity is not high, the life is very short; if direct charging, the life will also be shortened. Typically, the primary charge of the battery is to be installed with a small current to charge about 1 hour after filling the electrolytic solution. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
