Factors affecting the reliability of battery are divided into the following.First, the charger affects the performance of the battery, the battery charger is important, and the charging conditions of the battery have a great impact on the battery life. If the battery is always in constant voltage or“float”The type of electrical appliance is charged, and the battery life can be maximized. In fact, the life of the battery charge is much longer than the life of a simple storage state. Because the battery charges delay the natural aging process of the battery, the equipment should be charged regardless of whether the battery should be charged regardless of operation or downtime.
Second, battery temperature affects battery reliability General lead-acid battery optimal use temperature for 20 degrees Celsius, temperature has a great influence on the natural aging process of the battery. Detailed experimental data indicates that the temperature is 5 degrees per rise, the battery life has dropped 10%, so the design of the machine room should allow the battery usage environment to be kept around 20 degrees. It is best to configure precision air conditioner.
Third, the battery ripple current impact on the performance of the battery is ideally, in order to extend the battery life, the battery should always be maintained in“float”Charging or constant pressing state. In this state, the electric storage battery will absorb a small charger current, which is called“float”or“Self-discharge”Current. Although the battery manufacturer is recommended, some design makes the battery to withstand some extra small current, referred to as a ripple current. The ripple current is generated when the battery is continuously powered by the inverter, as the inverter must have input DC power to generate an AC output according to the principle of energy conservation. This allows the battery to form a small charge cycle, the battery voltage affects the battery reliability battery is a single“Original battery”Composition, each of the original battery voltages is approximately 2 volts, and the primary battery is connected in series to form a battery having a high voltage, a 12 volt battery consists of 6 original batteries, and a 24 volt battery consists of 12 raw cells, and the like. When the UPS battery is charged, each serial battery is charged. The performance of the original battery will result in some of the original battery charging voltage than other original batteries, and this part of the battery will aging in advance. As long as the primary battery of the primary battery declines, the performance of the entire battery will also decline. Test proves that the battery life is related to the number of primary battery, the higher the battery voltage, the faster the aging. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
