
Electric forklift battery "dry water" repair method
1. When the battery is added to the supplement, the discharge is charged, discharged to the monomer voltage of 1.2V to 1.7V, and should not be less than 1V to avoid the reverse electrode.
2. Pour all the liquid and add the replenishing liquid again.
3, then continue charging, charge the attack with a small current of 0.05c, charge for about 2 hours.
4, then charge with 0.27c, charge for about 20 hours.
5, then the battery is discharged to 1.7V to 1.8V, and the discharge current is 0.15c to 0.27c.
6, then normal charging, the liquid density is detected after the charge, and the density is assigned to 1.28.
7, adjust the balance charging, consistency the voltage, density charging
Battery truck battery "dry water" simple repair method
1. After adding the battery to the supplement, charging, circulating liquid, charging, use, 4 to 5 cycles, allowing the plate to sufficiently absorb liquid.
2, the charger is designed with sulfur charging, observe the liquid density, charge density to 1.2 to 1.27 normal phenomenon.
3. Putting the battery discharge, then desulfurization charging, the last gas, the liquid density adjustment is consistent.
Https: // 呜呜. Such as c power.com/case/content-4.html Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery