Scientifically starting the battery should not be excessive discharge, the start time should not exceed 10 seconds. If you can't start once, it should be done for the second time after 0.5 ~ 1 minute, the continuous start can not be more than three times; if it is still not started, there should be no problem in the other parts of the engine.The connection of the firm storage battery must be firm and good contacts at the joint, so as not to cause the charging discharge to cause the spark to burst the battery. The battery cover, the terminal, and the leading strip should be cleaned, there is no dirt, corrosion, and burn.
Fixed back to the battery should be fixed to the locomotive, avoiding strong vibration, it is best to use rubber, felt, etc.
When the electrolyte new battery is applied, it should be allowed to stand for 4 to 8 hours, so that the electrolytic liquid is soaked, and it is also easy to cool. When distributing the electricity, it is strictly forbidden to pour the water into sulfuric acid, and can only pour the sulfuric acid into the water, so as not to cause explosive burn.
The air hole on the smooth flow cover should remain smooth, otherwise, the gas pressure increase in the battery will cause the battery housing and the battery cover florescent.
Keeping the voltage battery must not be less than 1.7 volts per monobic, and it is not possible to complete the electrolyte, and more attention in winter is to freeze, damage the battery.
It is strictly forbidden to prevent metal or tools on the battery cover. When disassembling, you should remove the wire wire of the battery and the opposite is installed.
Cautious discharge storage battery must not discharge vigorously, the interval between the two starts should be greater than 2 minutes, starting using preheating preheating hours must not exceed 40 seconds.
When doing do not cut the generator, the wiring with the battery is not cut off.
Liquid plane examination often inspects the height of the electrolyte liquid, the electrolyte should be higher than 10 to 15 mm above the plate, and clean distilled water should be added to the upper portion of the plate, absolutely prohibiting the addition of river water, spring water, well water and tap water.
Scientifically preserved locomotive parking, should be removed, stored in indoors, and recharged regularly, it is best to charge once a month to vulcanize, and remove the iron line. It is not allowed to stack the stack, the tool, etc., and often use 20% alkaline water to clean the cover, keep it clean, dry. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
