
The separator of the lead-acid battery of the battery partition is made of a material such as microporous rubber, glass fiber, and its main function is to prevent the positive and negative plates from being short-circuited, so that the positive and negative ions in the electrolyte are successfully passed, and the positive and negative electrode is blocked. The falling of the active substances prevents the positive and negative plates from damage due to vibration. As the carrier of the electrolyte, it can absorb a large amount of electrolyte, which promotes the effect of promoting ionic diffusion (ion conductive). For the valve sealing lead-acid battery, the separator also serves as a "passage" of the oxygen generated by the positive electrode plate, and the oxygen circulation is successfully established, and the water loss is reduced. Ultrafine fiberglass separator is a key to the valve sealing lead-acid battery to achieve less maintenance.
The diaphragm in the valve-controlled sealed lead-acid battery is glass fiber cotton, which should have the following characteristics:
1. Excellent acid resistance and oxidation capacity.
2, uniform thickness, no needle hole, no mechanical impurities.
3, the aperture is small and the hole is large.
4, absorb and reserve the electrolyte capacity.
5, the resistance is small.
6, with a certain mechanical strength to ensure process operation requirements.
7, low impurity content, especially iron, copper content is low.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery