Why do some chargers still charge or constantly charging?

  The charge stop may be the same fault with the charge, which is poor line contact. The non-stop charging phenomenon and cannot constant pressure are the same nature, the same serious problem, more serious than the above two problems, slightly not paying attention, it may make the battery.     However, the above phenomenon is still very small, most chargers do not have similar problems without often, this charger is not only a few, but mostly used for many years old. The correct use of the charger is to be charged in the later stage, although it has been filled in most, but a small amount of the vulcanized substance is not completely reduced.     At this time, the charger will continue to charge 1-2h to achieve full reduction purposes. When the current displays only 50 mA or less, it can be unplugged off when only 50 mA or less is not changed for a long time. When there is a positive pulse repair function, after unplugging the power, the cable between the charger and the battery may not be removed, and the pulse is constantly impacting the sulfide crystal to restore the plate active material. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery LiFePO4 Battery 48V 150AH LiFePO4 Battery 48V 100AH