Lead-acid battery charging principle - construction of batteriesElectric vehicle batteries must have the following conditions:
◎ High performance
◎ Assessment.
◎ long life
◎ Maintenance is easy
Since the glass fiber tubular lead battery is made of accumulate multiple experimental results, there is a number of advantages.
Polar plate
The appropriate specification plate and quantity are selected according to the battery capacity. When charging and discharging, the amphoteric active substances repeatedly expands and contracted as the volume changes. Among the two-pole active substances, the cathode plate is strong, and the binding of the octaves of the anode plate is weak, and thus, when charging and discharging, it will slow down, which is the reason for the life of lead storage battery. . Extend the battery life of the battery, can be resistant to the earth, and the anode plate is improved.
The glass fiber tube-type anode plate: This is on the gem-shaped plaid (Rumerin) of the glass fiber, and the hose is sealed after the hose and the roughness are filled with the pellets, so that It changes, producing activated substances, since the activated substances do not fall off, and good contact with the electrolyte is also a very good plate material. The battery with this plate is the only choice for the electric vehicle. The woven hose is composed of 9 microm (μ) glass fibers, the elasticity, can be done or shrink, and the permeability of the electrolyte is also very good, this hose is the best product, for a long time Good practical performance.
Pastel panel: The paste-like lead powder refining dilute sulfuric acid is applied to the lead-containing lattice, and the active substance formed after drying. This approach has been used on a cathode plate of a lead battery, and also on the battery anode plate of the car, small truck.
2. Isolation board
It can prevent yin and the anode plates produce short circuits, but do not hinder the circulation of both polarion ions. Moreover, it is used for a long time, nor does it degrade, or release impurities. The lead battery is generally using a glue isolation plate.
3. Battery housing
Strong acid resistance, mechanical strength. The battery housing for electric vehicles is made of special treatment, which is particularly strong, and the upper cover is also used in the upper cover.
4. Electrolyte
The specific gravity of the electrolyte is standard at a value of 20 ° C, and the electrolyte standard specific gravity of the electrolyte standard is 1.280 when the battery of the electric vehicle is fully charged.
5. Liquid dumping
The function of the liquid bolt is the gas generated by the discharge charging and supplemented pure water, and the proportion is measured.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
