The battery temperature (electrolyte temperature) is raised, and the active material on the yin male plate will deteriorate, and the anode lattice is corroded, and the battery life is shortened. When the battery temperature is too low, the battery storage capacity will be reduced, easy Over-discharging, thereby shortening the battery life. This relationship will also vary depending on the battery type and polar material. Therefore, comply with the following conditions:Usually, the electrolyte temperature of the battery should be maintained at 15 to 55 ¡ã C for the purpose of use, and if it is not exceeded, it is not exceeded to discharge, and the range of 0 to 60 ¡ã C is charged at 0 to 60 ¡ã C. When actually used, since the temperature will rise during charging, the electrolyte temperature at the time of discharge is maintained at 40 ¡ã C or less.
Production of battery gas and ventilation ventilation
The electrolyte specific gravity of the lead battery changes with temperature change, the specific gravity of the electrolyte is 20 degrees at 20 degrees Celsius, so the readings on the gravity must be converted to the standard specific gravity of 20 degrees Celsius. When the temperature change Celsius, the specific gravity changes 0.0007, so the temperature, the temperature is measured, and the temperature is measured when the temperature is measured. The specific gravity measured when the temperature T ¡ã C is ST, and the specific gravity of the standard temperature is 20 ¡ã C in the following formula S20
S20 = ST + 0.0007 (T-20)
S20 .. is a specific gravity of converting 20 ¡ã C
ST .. The proportion measured at T ¡ã C
T ... is the actual Celsius temperature measured by the electrolyte
If nitric acid, hydrochloric acid, sulfite, salt, organic matter, etc., will be corroded to reduce battery life, and will also speed up self-discharge, in addition, copper, nickel, iron, manganese will also harm the battery Self-discharge increases. When the battery is supplemented with the liquid level, it must be used to use pure water, and when the battery is flush with water, it is necessary to cover the battery cap to avoid flowing into the Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
