Why does the polar panel? In the process of creation, the battery is not uniform due to the unevenness of the oil, and the change in the polar plate is not uniform, resulting in the distribution of the current in the plate on the plate and chemical changes in the current change during charge. Weak unevenly caused polar expansion and uneven contraction. Thus, the bending of the plate is caused, even broken. This is the cause of manufacturing, of course, there is also a reason for operation and maintenance. If it is often overcharged or over-discharge, it is charged, discharged, and the temperature is caused to increase the temperature on the polar plate under the action of the current. Most of the phenomenon of the bending of the polar plate, the occurrence of the interior of the fault shed, which is mostly here.Most of the bending of the plates occurs in the positive plate. If the bend is lighter, it is not moving, and it can be done; but if the bend is serious, the panel is taken out of the container, slowly flattened with a pressure plate or press. However, pay attention to the failure to pressurize or pressurize repeatedly to avoid excessive effective substances to fall off or prescribe the plate. After the polar plate is flattened, it is to be rinsed with distilled water, and then re-assemble it, carry out the initial powerless.
If the polar bending is extremely serious, it is broken, or the battery is broken, or if it is touched, the battery needs to replace the new plate.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
