1, do not short the battery. When the positive and negative electrodes of the battery are electrically contacted by external substances, the battery is shorted, for example, an inner packaging battery placed in a pocket will cause a short circuit due to metal material such as a key or coin.2, install the battery correctly to make the polarity of the battery (“+”and“-”And the tag of the electrical appliance correctly corresponds. If the battery is incorrectly mounted into the electrical appliance, short or charging may occur, resulting in rapid increase in battery temperature.
3, do not try to charge the battery. Charging the original battery that cannot be charged will cause gas and heat in the battery inside.
4, do not force the battery to discharge. When the battery is forced to discharge, its voltage will be lower than design performance and generate a gas inside the battery.
5, do not heat or weld the battery directly. When the battery is heated or soldered, heat can cause short circuit inside the battery.
6, do not disassemble the battery. When the battery is disassembled or separated, it is possible to contact between the battery components, resulting in a short circuit.
7. Do not mix new old batteries or different models, brands of batteries. When you need to replace the battery, you should replace all batteries at the same time. When using different brands and models of batteries or newly different batteries, some batteries will over-discharge due to different voltages or capacities between different batteries.
12V4AH lead-acid battery
8, do not deform the battery. Do not squeeze, poke or other forms of damage to the battery, which often causes short circuit in the battery.
9. Do not put the battery into the fire. When the battery is placed in the fire, the aggregation of the heat leads to explosion and personal injury, except for the appropriate controlled incineration treatment, do not try to burn the battery.
10. Do not let children replace the battery in the case of no adult supervision. Those batteries that are likely to be swallowed should try to avoid contact with children, especially those that can put into the food module shown in the figure. Once someone eats the battery, seek a doctor to help.
11, do not seal or change the battery. Sealed batteries or other forms of changing batteries that cause the battery's secure valve to be blocked, so that when the gas is generated in the battery, it cannot be discharged in time. If you think that the battery must be changed, you should try to get the manufacturer's recommendations.
12. For unused batteries, they should be stored in their original packaging, and try to stay away from metal materials. If the packaging has been opened, it should be discharged in an orderly, do not confuse the stack. When the non-packaged battery and metal material are mixed together, it is possible to short the battery. The best way to avoid this happens is to use their original packaging to save unused batteries.
13, unless it is used for emergency, the battery should be taken from the electric device as much as possible. When a battery is not satisfied or can be expected to be not used for a long time, it is advantageous from the device, although the battery currently has a protective housing or otherwise controlling the leakage. But a part or completely used battery is still more likely to leak more than a battery that has not been used. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
