1. After the liquid is lowered, it should add distilled water or add the electrolyte?Distilled water should be added to the liquid level, and the electrolyte should not be applied. Since the low drop in liquid surface is due to moisture evaporation and the electrolysis of the water. If the electrical solution is added, the proportion is increased and the life of the battery is affected. However, if the liquid level reduction is caused by the leakage of the outer tank crack, it should be added after the sewing repair, then add a good electrolyte.
2, how high should I have an electrolyte liquid surface?
The battery electrolyte liquid surface should be higher than the polar for 10-15 mm. The liquid surface is too high and easy to overflow, corroded around the machine. However, the upper part of the polar plate is easily exposed, which will not only reduce the battery capacity, but the exposed plate will be evaporated. The plastic tank battery has an electrolyte highly identifier on the outer tank, and the general electrolyte surface should be parallel to the marking line.
Article from: http://www.brcpower.com/ Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
