General instructions for electric forklifts Description There are seven-part electric forklift debug installation, stacking operation, loading and unloading operation, electric forklift battery, battery charging operation, battery replacement operation, electric forklift maintenance composition. The specific description is as follows:A, commissioning and installation of electric forklift
The electric forklift is checked if all parts are in a well state, all of the operating components and security devices. Check if the brake and battery are charged before moving. Open the car lock, slowly turn the acceleration, run forward the accelerator forward. The stenosis of the electric forklift should be decelerated.
B, stacking operation of electric forklift
The electric forklift load must be erected at the low time, and the driver stands on the ground, the fork is raised to the shelf, slowly at home fork to exit from the tray.
C, loading and unloading of electric forklift
The fork of the electric forklift is raised to the required height. When entering the tray, slowly approaching to unload the cargo tray until the load is safely placed on the fork, slowly moves out the channel, slowly reduces the load while determining the fork does not It will encounter an obstacle.
D, electric forklift battery
Check the battery, charge and replace according to the instructions. Tobacco or flammable, easy to produce spark is strictly prohibited near electric forklift or charger. Measure the size and weight of the battery to maintain the stability of the electric forklift.
E, charging operation of electric forklift battery
The battery cannot be completely discharged, avoiding partial charging, allowing to charge the charger to issue a charging completion signal. Normal charging can last 14 ~ 16 hours, the electrolyte density of each monomer battery after charging should reach 1.27 to 1.29 kg / 1.25 ¡ã C; the voltages of the major monomer batteries are approximately 2.7V. Wise practice is to recharge the battery after each working day.
F, electric forklift replacement battery
First remove the fixed screw of the battery, then remove the cable from the battery terminal to slide out or hang out the battery, and finally replace the same model of the battery.
G, maintenance of electric forklifts
When the electric forklift is carried out, the total switch is disconnected! Maintenance and maintenance of electric forklifts by professionals, at least once a year, after each maintenance work, the performance of the forklift and its safety devices should be checked. Check for forklifts to avoid danger of stopping or hurting.
Article from: http://www.brcpower.com Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
