Inverter selectionIf there is an inductive load in the electrical appliance, you need to use a sine wave inverter; if only the resistive load and capacitive load are only equipped with a correction wave or a square wave inverter. This is because the back-electrical force of the inductive load is a fatal injury to modify the wave or square wave, and a sine wave must be used. The capacitive load requires a higher peak voltage to drive, corrected the wave or square wave just a high peak characteristic, no need to use a sine wave.
When selecting the inverter power, it is necessary to ensure that the inverter's * large output power is greater than the total power of the electricity appliance used in the same time (the power of the inductive load is calculated by triple actual power).
Fourth, is it grid?
If the local regulation allows the user's generator to enter the grid, you can select the grid controller and the grid-connected inverter to enter the electric grid from the electric power generator; the user's electrical equipment can be connected to the grid, so that the province Go to the Huizhong battery pack.
When customers order our products, only need to indicate whether it is connected to, we will select controllers and inverters according to customer needs.
Efficiency improvement helps traditional operation and maintenance from construction, design, to operation and maintenance technology. "But through the sensor and Internet of Things technology, the data analysis is integrated into, so that it really becomes a smart operation and maintenance system. This part is 'software + experience', for traditional practitioners, needs and software industry or information The technical industry is integrated. "Mi Dong said. The third is the service. Not only the intelligence process is not only the improvement of hardware, as well as the data of the original stock facility. For example, the smart operation and maintenance network of the network. Many places have a smart platform, but the information network information is very missing. It is not enough to have a wisdom of the operation and maintenance platform, and there must be data according to the original facilities.
When the wind speed is less than the starting wind speed, the fan cannot rotate. After the wind speed reaches the start-up wind speed, the fan starts to rotate, and the generator is powered. Output power supply is supplied and charged to the battery. When the battery pack voltage reaches the set * high value, the voltage detection obtains the signal voltage through the control circuit to switch, so that the system enters the regulator closed loop control, but it is necessary to maintain charging the battery, and does not cause the battery overcharge. When the wind speed exceeds the cutoff wind speed, the fan passes the wind turbine to operate or stop the wind turbine at a certain speed of rotation, to ensure that the wind turbines are not damaged.
Please
Wuxi Huizhong-Huizhong main products include: lithium-ion battery, lithium battery, battery, lead-acid battery, sealed battery, tubular colloidal battery, OPZV colloidal battery, OPZV tubular colloidal battery, DC screen storage battery, electronic scale battery, EPS Battery, emergency power battery, UPS battery controller, inverter, solar, solar photovoltaic board, inverter battery, solar pest lamp, solar household power supply, tricycle battery, automotive battery, electric car battery, motorcycle battery, Electric vehicle battery, Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
