1. Check before charging, whether the forklift battery is intact, whether the wiring is intact, and opens the air cover. Do not open or dial out the liquid plug on the battery, do not add liquid before charging or charging, smoking is strictly prohibited in the vicinity of the battery, generating sparks or open flames, the battery cannot discharge at the same time, when charging, the battery does not put the metal tool, charging Do not repair the battery, the electrolyte temperature is below 55 ¡ã C during charging.2, the electrolyte temperature in the charging process should not exceed 55 ¡ã C, otherwise it should be taken to reduce charging current, artificial cooling or suspend charging.
3, the forklift battery charging environment must be ventilated. Especially with the car is charged around the air. The battery charger is well ventilated, the temperature is not higher than 40 ¡ã C, and the air flow can be calculated to avoid the accumulation of hydrogen-oxygen mixed gas when the battery is charged, and the following formula can be calculated: Q = 0.05×i×N (where Q: air flow, i: charging current charging current, N: battery monomer), should ensure that the amount of air flow in the charging is greater than the amount of air flow in the calculation formula.
4, when the forklift battery is charged to saturation, the voltage and electrolytic solution is basically not rising in 2-3 hours, and a large amount of air bubbles, the electrolyte is 1.26, and the single voltage is 2.4V.
5. When the single voltage dropped to 1.7V, the voltage meter voltage 41V (driving load), the electrolysis specific gravity decreases to 1.18, should be charged in time.
Xingwo Buchang Battery
6. When the forklift battery charges, the electrolyte specific gravity is 1.26 with distilled water or a specific gravity of 1.4, and the electrolyte specific gravity is 1.26 and maintains a sufficient height. Battery charging start ends should be recorded for voltage electrolyte. Record will help the maintenance and protection analysis of the battery.
7, forklift batteries do not near the fire source and heat source. After the charging is completed, the gas cover is covered, and the electrolyte is wiped out, keep the joint clean and dry, and apply Vaseline. Forklift battery flushing must be carried out outside the car.
8, such as the new forklift battery, the electrolyte of 1.26 is cooled to 30 ¡ã C to 30 ¡ã C, inject the battery, the amount of injection is 10-20 mm higher than the protective plate, waiting for 6 hours, the liquid temperature drops below 35 ¡ã C Can start cha Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
