Geerady Lifepo4 Battery Manufacturer is a professional supplier of lithium-ion batteries and power solutions.

Email:sales@geerady.com



Battery Maintenance Series

Battery Maintenance SeriesMany owners are in a daily car, and there is not much way to use the battery, in fact, there are many doorways in the car battery. When the vehicle is driving and parked, there are some details of the problem worthy of attention. Here we list some precautions in actual use.

If the battery is not used for a long time, it will slowly discharge it until it is completely scrapped. Therefore, a car should be started every other period of time and charging the battery in a timely manner. Another method is to pull the two electrodes of the battery to reduce the power consumption of the electric appliance in the car.

In addition, the battery of the battery can be reflected on the dashboard. When the current meter pointer does not display insufficient storage, it is timely charge. Moreover, the electrolyte density of the dry reservoir should be adjusted according to different regions, different seasons standards, and supplement distilled water or special replenishment in the electrolyte loss, can not be replaced with drinking pure water.

It is worth noting that when the start of the vehicle is started, the battery can cause the battery to be damaged due to excessive discharge, the correct method is that the ignition time of the vehicle is not more than 5 seconds, and the startup time is not less than 15 seconds. . It should also always check whether the small holes on the battery cover are ventilated. If the battery cover is blocked, the shell of the battery is blocked by the expanded electrolyte.

First, use the moist rag to brush the outside, put the dust, oil, white powder of the panel and the two-stage piles, etc., which can make the drain of soil wiping clean. Often scrubbelling the battery, the two-stage pile head of the battery is not easy to deposit the powder, indirectly extend the life of the battery.

Second, the electricity of the primary battery should be checked each month, the liquid level of the electrolyte should always be maintained between the Max and MIN markers, and often check if the exhaust hole is unblocked to prevent the battery to deform or burst. When the voltage drop is obvious, the lamp is bright, the ignition is not smooth and the start is weak, and should be charged in time.

Finally, the new battery should be kept from the heat source and open flame during storage, and it is necessary to ensure the ventilation environment when charging. When installing the battery, check if the fix is ​​firm, there is no vibration after the vehicle is started, and often check the two-stage pile head of the battery, it must be kept in contact, prevent short-circuit due to virtual access. In addition, the car is driving in a very cold weather, avoiding the battery to complete discharge and electrolyte freezing.  Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery