During the charging process, hydrogen is generated, it should be far from the open flame, can not smoke nearby, the forklift as a must-have equipment, many times, did not get a standardized management, in order to further check the battery failure, so as to The state is exactly determined, and the inspection can be tested in conjunction with the battery charging process, and the internal failure of the battery is determined according to the different performance of the battery in the charging inspection.normal status. When charging the battery, the specific gravity of the battery voltage and the electrolyte is rising, and the temperature of the electrolyte is not high. This indicates that the battery status of the battery is normal, but it is too much discharge, which should be charged.
Vulcanization state. Internal vulcanized battery, at the time of charging, the original single voltage can rise to 2.8V, the electrolyte temperature is also high, with the continuation of charging, after a few hours, the single voltage dropped to 2.2V, and later rising Good battery charges are the same. Internal serious vulcanized battery, the voltage of single battery will be higher than 2.8V, the specific gravity of the electrolyte is not raised, and the battery will have a bubble phenomenon at the beginning of charging. Recommend: LiFePO4 Battery Manufacturer Energy storage battery Manufacturer Integrated machine energy storage battery series Manufacturer Lead lithium battery Manufacturer Outdoor Backup Battery Manufacturer Portable outdoor power supply Manufacturer Power battery Manufacturer Powerwall LiFePO4 Battery Manufacturer Battery rack Manufacturers Telecom LiFePO4 Battery Manufacturer Wall mounted battery storage Manufacturer China Lifepo4 Battery
